Serviced, oil change and Teflon tape.

Changed oil and oil filter. New locking mechanisms (x2) for the hatch to the engine compartment, 1 better used welding beam (modified), New welding wires and tape on the welding beams, New connectors to the welding beam New rubber seal for the lid, New screen part, Aligned the lid, Changed tires,

Change oil, filter in vac pump. Adjusted tool. Straighten the big tool. Adjusted Weld plastic brake. Change a vacuum hose. Tool fabric: 260x160mm, 190x135mm

Cleaned the pump and serviced Works fine
Mould: 250x140mm

Directed upper part. Refurbished plastic roller. Change the main switch. Adjusted circuit board for buttons. Change cover gasket. Change oil+filter in vac pump. Tool: 210x140mm

Test drive works great! 👍

Works great! Tool half gastro, 220x170 and 135x105 (oval) Change the oil in the pump

New potentiometer for speed control. Cleaned and adjusted air valves. Printer responds and runs but lacks ink. No vacuum, machine is used running on food grade gas. Tools: 195x150, 225x155 (oval), 230x190mm

Welded and milled arms for the counterweights and arranged locking mechanism for the axles, Sealed all possible sources of leakage with silicone and welded crack in the table. Vacuum value: 6-7mbar both sides

Heating plate OK

Heating plate OK